Pressing Instructions



DTF TRANSFER PRESSING INSTRUCTIONS

 

  • Heat your press to 325 and set timer to 15 seconds

  • Pre-press garment for 5 seconds to remove moisture

  • Place film on garment with printed side down

  • Cover film with Teflon sheet or parchment paper. Press for 15 seconds using HEAVY pressure.

  • Let cool for 30 seconds (cold peel) or until completely cool.

  • Remove film.

  • Cover with Teflon or parchment, re-press for 5-10 seconds.

  • Wait 24 hours before washing

 

PATCHES/ IRON ONS - HEAT PRESS INSTRUCTIONS




Please note using a heat press for large patches is highly recommended for optimal results.

THESE WILL NOT WORK WITH CRICUT EASY PRESS OR HTV RONT PRESS. NO IRON EITHER!

  • Temperature: Set your temperature to 350°F

  • Pressure: Set your pressure to Firm (Heavy pressure)

  • Prepress garment for 5 seconds

  • Place your patch onto a fabric surface, design side up and adhesive backing side down.

  • Place a teflon/parchment sheet over the patch to prevent potential fabric damage.

  • Time: Press your patch for 20 to 40 seconds and open the press.

  • As every heat press varies, start by pressing for 20 seconds and verifying if the patch has adhered. If not, press for an additional 10-20 seconds. This will help determine the optimal press time for applying the patch.

  • Turn garment inside out and press for an additional 10 seconds

NOTE: Variations in colors and sizes may differ from the image mockup. Minimal color alterations may result after pressing. Returns and exchanges are not accepted. User error is not our responsibility.

 

Care Instructions

When washing any fabric with patches attached, be sure to turn the garment inside out.

Do not wash in hot water or dry with heat or you risk melting the patch adhesive and loosening the patch.


 

 

Collections

1 6